JT4BD Series 13 SEER, 4 Ton, 3 Phase, 410A Condenser

Sold As Is - No Obvious Damage

The JT4BD Series heat pump, when combined with our
engineered coils or air handlers, offers a full line of quality,
split system heating and cooling equipment. Units are
ideally sized for slab or rooftop mounting in light commercial
applications.

Sold As Is - No Obvious Damage

• Durable, Attractive Cabinet – Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units.
• Composite Base Pan – Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel.
• Copper Tube / Aluminum Fin Coils – Outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability.
• Permanently Lubricated Motor – A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow.
• Full Service Valves – These brass valves are easily accessible and simplify servicing of the refrigeration system.
• Time / Temperature Defrost – A reliable, industry standard control offers various time settings to meet any type climate.
• Removable Top Grille Assembly – Allows ease of service from the top without disconnecting fan motor leads.
• Liquid Line Filter Drier – Included with unit, field installed.
• One Piece Top/Orifice – Designed for maximum airflow and quiet operation.
• High Pressure Switch – Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits.
• Common Suction Service Port – This port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability.
• Five Minute Restart Time Delay – When the unit shuts down, a five minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure.
• Suction Accumulator and Crankcase Heat – Protection from liquid flood back and future compressor failures.
• Hot Gas Muffler – Reduces compressor noise and vibration.
• Easy Compressor and Control Access – Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit.
• Complete Metal Wrapper – Protects the unit coil from being damaged

• JT4BD Series 13 SEER Spec Sheet https://cdn.acpro.com/documents/Mammoth_JT4BD_Technical-Specifications.pdf