Malco® AA44D Blind Rivet, 1/8 in, 0.357 in L, 1/8 in Dia, 0.188 to 0.25 in Grip, Aluminum

Malco® blind rivets provide a strong, secure connection between two or more sheets of material, that will not loosen with vibration. Blind rivet fasteners can be used where access is limited to only one side of the material to be fastened. Rivets require only a pre-drilled or pre-punched hole. The blind rivet is an assembly, consisting of a mandrel and an eyelet body. Mandrels are used only to set the rivet body and are then discarded. Mandrel is designed to break off at the crimp after pulling (setting) the rivet body. No operator skill is required to set blind rivets. Low rivet profile offers cosmetic advantages over screws.

Malco® Blind Rivet, 1/8 in Size, 0.357 in Length, 1/8 in Dia, 0.188 to 0.25 in Grip Range, 1/4 in Head Dia, 0.032 in Head Height, 0.125 to 0.135 in Hole, 150 lb Tensile, 120 lb Shear Strength, Aluminum, Additional Information: Aluminum Mandrel

• Only require a pre-drilled or punched hole
• Low rivet profile offers cosmetic advantages over screws
• No operator skill is required to set blind rivets

• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/Malco_CS42DT_Warranty.pdf
• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/Malco_CS42DT_Warranty.pdf