Available at All Branches
Grundfos UP N circulator pumps have a corrosion-free stainless steel pump housing and are recommended for domestic hot water recirculation and underfloor heating systems. UP N can be connected to an on/off time switch to limit pump operation to periods when hot water is usually required. The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.
Grundfos Circulator Pump, Series: UP Series, Model: UP 26-99 SF, 33.9 gpm Flow Rate, 32.15 ft Maximum Head, 245 W Power, 115 V, 2.15 A, 60 Hz Frequency, 145.04 psi Maximum, HP Rating: 0.329 hp, 2 in Connection, Flange Connection, 1 ph Phase, 2 Pole, 32 to 230 deg F, Axial, Radial Bearing, Composite/PES/Stainless Steel, Dimensions: 6-3/8 in L x 6-1/2 in H, Additional Information: 6-1/2 in L Port-to-Port
| Additional Information | : | 6-1/2 in L Port-to-Port |
| Amperage Rating | : | 2.15 A |
| Bearing Type | : | Axial, Radial |
| Connection Size | : | 2 in |
| Connection Type | : | Flange |
| Dimensions | : | 6-3/8 in L x 6-1/2 in H |
| Flow Rate | : | 33.9 gpm |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 0.329 hp |
| Material | : | Composite/PES/Stainless Steel |
| Maximum Head | : | 32.15 ft |
| Maximum Pressure | : | 145.04 psi |
| Model | : | UP 26-99 SF |
| Number of Poles | : | 2 |
| Phase | : | 1 ph |
| Power Rating | : | 245 W |
| Series | : | UP Series |
| Temperature Rating | : | 32 to 230 deg F |
| Voltage Rating | : | 115 V |