Field Controls 02724001 Controller, 6 in, Steel, Galvanized

A double acting control for gas fired furnaces and boilers is widely used for conversion burner installations, gas draft-induced appliance operation with mechanical draft inducers or sidewall power venters. It is also recommended for use on gas atmospheric appliances where a draft hood cannot be installed and can improve combustion stability and draft on many gas atmospheric installations with venting problems. The MG-1 provides precise, accurate control of drafts at levels higher than permitted by a standard draft diverter, which is a frequent requirement with gas. Because it is double acting, it opens out to relieve positive vent system pressures as low as 0.01 in draft adjustments using weights are simple and accurate from 0.01 to 0.1 in.

Field Controls Controller, Model: 6MG1, 6 in, Steel, Galvanized, Silver, 11-11/16 in L

• Because it is double acting, it opens out to relieve positive vent system pressures as low as 0.01 in
• Can improve combustion stability and draft on many gas atmospheric installations with venting problems
• Provides precise, accurate control of drafts at levels higher than permitted by a standard draft diverter