Duct liner is typically attached to duct walls by 2 fastening methods, one with mechanical fasteners and the other with adhesive. Mechanical fasteners are utilized to prevent delamination of the liner while adhesives bond the liner to the metal ensuring that air flow can not intrude between the 2 materials. The choice of an adhesive is affected by several factors some of which are the method of application, acceptable dry time, solvent type. Duro Dyne DTWA is a fast tacking, quick bonding solvent base aerosol spray duct liner adhesive. It may be used for bonding low and high density duct liner or wrap to the interior or exterior of metal ductwork. Duro Dyne. DTWA bonds rubber, fiberglass, plastic, and other types of insulation to steel.
Duro Dyne® Spray Web Adhesive, Series: DTWA Series, 12 oz Net Content, Aerosol Can Container, Composition: 20 to 40% Acetone, 20 to 40% Propane, 10 to 20% Dimethyl Ether, 10 to 20% N-Hexane, 2.5 to 10% 2-Methylpentane, 1 to 2.5% 3-Methylpentane, Gas Form, White, Strong Mint Odor/Scent, 0.724 Specific Gravity, 89.77 deg F Boiling Point, -156 deg F Flash Point, 378 g/L VOC, Applicable Materials: Cotton Liner, Fiberglass, Rubber, 50 to 110 deg F Application, 130 deg F Service, 50 deg C Storage
Applicable Materials | : | Cotton Liner, Fiberglass, Rubber |
Boiling Point | : | 89.77 deg F |
Color | : | White |
Composition | : | 20 to 40% Acetone, 20 to 40% Propane, 10 to 20% Dimethyl Ether, 10 to 20% N-Hexane, 2.5 to 10% 2-Methylpentane, 1 to 2.5% 3-Methylpentane |
Container Type | : | Aerosol Can |
Flash Point | : | -156 deg F |
Form | : | Gas |
Net Content | : | 12 oz |
Odor/Scent | : | Strong Mint |
Series | : | DTWA Series |
Specific Gravity | : | 0.724 |
Temperature Rating | : | 50 to 110 deg F Application, 130 deg F Service, 50 deg C Storage |
VOC Content | : | 378 g/L |