Bradford White® TTW® RG1PV40S6X Gas Water Heater, 40 gal, 38000 Btu/hr, 11.1 kW, Propane Gas
- Manufacturer: Bradford White Corporation
- Brand Name: Bradford White®
- Part#: BWRG1PV40S6X
- MPN: RG1PV40S6X
- UPC: 671632796182
- Min. Order Qty: 1
- Qty. Interval: 1
-
Available at All Branches
-
Price:
Bradford White® Gas Water Heater, 40 gal Capacity, 38000 Btu/hr, 11.1 kW, 72 gph First Hour Delivery, 0.66 Energy Factor, 41 gph Recovery Rate, 80 % Efficiency, 120 V, 60 Hz, NPT Connection, 150 psi, Propane Gas Fuel, Spark to Pilot Ignition System, Lead-Free, 20 in Dia x 57-5/16 in H x 24-3/4 in D
| BTU Rating | : | 38000 Btu/hr |
| Capacity | : | 40 gal |
| Connection Type | : | NPT |
| Dimensions | : | 20 in Dia x 57-5/16 in H x 24-3/4 in D |
| Efficiency | : | 80 % |
| Energy Factor | : | 0.66 |
| First Hour Delivery | : | 72 gph |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Propane Gas |
| Ignition System | : | Spark to Pilot |
| Lead-Free/Contains Lead | : | Lead-Free |
| Power Rating | : | 11.1 kW |
| Pressure Rating | : | 150 psi |
| Recovery Rate | : | 41 gph |
| Voltage Rating | : | 120 V |
- Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot
- Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
- Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- An exclusive green LED light prompts the installer during startup and provides 10 different diagnostic codes to assist in troubleshooting
- Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
- An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Temperature and pressure relief valve included
- Durable tamper-proof design low restriction brass drain valve
- Protective magnesium rod
- Factory installed heat traps design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Factory installed Hydrojet® total performance system
- Advanced ScreenLok® technology flame arrestor is designed to prevent ignition of flammable vapors outside of the water heater
- Designed for installations where atmospheric units cannot be used
- Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations
- Electronic sensor prevents burner operation if flammable vapors are detected
- No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
Specification Sheet