Contact 800-252-8714

  1. pin-int

Beacon Morris® HB-108A Horizontal Hydronic Unit Heater, 8030 Btu/hr BTU, 115 V, 1 ph -Phase, 1/3 hp Motor

  • Manufacturer: Beacon Morris
  • Brand Name: Beacon Morris®
  • Part#: BEAHB108A
  • MPN: HB-108A
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at All Branches

Beacon Morris® offers both steam and hot water unit heaters for residential applications, perfect for the garage, basement or workshop. Steam and hot water unit heaters are comprised of a heating coil that is energized by either steam or hot water produced by a boiler or some type of central water heating device. Hung from the ceiling, a fan-mounted behind the coil forces air through the hot coil thus drawing heat out of the coil and dispersing it to the occupied space. HB Series horizontal unit heaters are ideal for hot water installations. A wide range of outputs and airflows allows virtually unlimited flexibility in job design. Beacon Morris® horizontal unit heaters are available in both serpentine and header-type units. Serpentine unit connections are conveniently located on the side, allowing for easy installation close to the ceiling while simplifying piping connections. We recommend putting the heater in an out of the way corner of your garage and our optional OSHA approved fan guard will ensure safety during operation.

Beacon Morris® Horizontal Hydronic Unit Heater, 8030 Btu/hr, 115 V, 0.8 A, 60 Hz, 1 ph Phase, 1/3 hp Motor HP, 1350 to 1550 rpm Motor, 0.8 gpm Water Flow Rate, Frame Mounting, Die-Formed Steel Housing, Painted Housing, 18 in Overall Length, 5-1/4 in Overall Width, 16 in Overall Height, Copper Tube, 3/8 in Tube, Aluminum Fin, Additional Information: HB Series, Serpentine Hot Water Coil, 5 Louvers

Additional Information      :      HB Series, Serpentine Hot Water Coil, 5 Louvers
Amperage Rating      :      0.8 A
BTU Rating      :      8030 Btu/hr
Fin Material      :      Aluminum
Frequency Rating      :      60 Hz
Housing Finish      :      Painted
Housing Material      :      Die-Formed Steel
Motor HP Rating      :      1/3 hp
Motor Speed      :      1350 to 1550 rpm
Mounting Type      :      Frame
Overall Height      :      16 in
Overall Length      :      18 in
Overall Width      :      5-1/4 in
Phase      :      1 ph
Tube Material      :      Copper
Tube Size      :      3/8 in
Voltage Rating      :      115 V
Water Flow Rate      :      0.8 gpm
  • Horizontal louvers standard
  • Thermostats feature off-auto and auto-fan-off
  • Copper/aluminum coils
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Beacon_Morris_HB_108A_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Beacon_Morris_HB_108A_Instruction_Installation_Manual.pdf
  • pdfSubmittal https://assets.unilogcorp.com/267/ITEM/DOC/Beacon_Morris_HB_108A_Submittal.pdf
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Beacon_Morris_HB_108A_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Beacon_Morris_HB_108A_Instruction_Installation_Manual.pdf
  • pdfSubmittal https://assets.unilogcorp.com/267/ITEM/DOC/Beacon_Morris_HB_108A_Submittal.pdf