Contact 800-252-8714

armacell® BST05834 ARM5834BLS
  1. pin-int

armacell® AP™ ArmaFlex® BST05834 Pipe Insulation With Reinforced Lap Seal, 3/4 in Thick Wall, 5/8 in ID, 2-1/8 in OD

  • Manufacturer: Armacell
  • Brand Name: armacell®
  • Part#: ARM5834BLS
  • MPN: BST05834
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at All Branches

Armaflex insulation is a flexible elastomeric thermal insulation supplied as unslit tubing. The expanded closed cell structure of Armaflex insulation makes it an efficient insulation. The closed cell structure of Armaflex insulation effectively retard the flow of moisture vapor and Armaflex is considered a low transmittance vapor retarder. Additional vapor retarder protection may be necessary when installed on very low temperature piping or where exposed to continually high humidity conditions. It also efficiently reduces heat flow for hot water plumbing and liquid heating and dual temperature piping. For use on cold pipes, Armaflex insulation thicknesses have been calculated to control condensation on the insulation outer surfaces, as shown in the table of thickness recommendations. The insulation is designed for installation above ground. Indoors, no protective finish is required but may be desirable. Outdoors, a weather resistant protective finish is to be applied.

armacell® AP™ ArmaFlex® Pipe Insulation, 3/8 x 5/8 in Nominal, 5/8 in Inside Diameter, 2-1/8 in Outside Diameter, 3/4 in Wall Thickness, R-Value: R5.6, -297 to 220 deg F, IPS x CTS Connection, Elastomer, Black, 6 ft Length

Color      :      Black
Connection Type      :      IPS x CTS
Inside Diameter      :      5/8 in
Length      :      6 ft
Material      :      Elastomer
Nominal Size      :      3/8 x 5/8 in
Outside Diameter      :      2-1/8 in
R-Value      :      R5.6
Temperature Rating      :      -297 to 220 deg F
Wall Thickness      :      3/4 in
  • New angled cut with more surface area for a better bond
  • A single interior adhesive liner for quicker application
  • Fiber-free, formaldehyde-free, low VOC and non-particulating formulation protects indoor air quality
  • Microban® anti-microbial product protection inhibits the growth of mold and mildew in the insulation
  • Long-lasting, retains thermal integrity over time
  • Closed-cell foam structure prevents moisture wicking and eliminates need for additional vapor retarder
  • New durable, low profile lap seal with wider release tab, stays closed and looks neat
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Armacell_BST13834_Specification_Sheet.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Armacell_BST13834_Specification_Sheet.pdf