Contact 800-252-8714

AireForce® WSH2BE4M1SP30K AFWSH2BE4M1SP30K
  1. pin-int

AireForce® WSH2BE Series WSH2BE4M1SP30K High Efficiency Heat Pump, 208/230 V, 13.7 A, 30000 Btu/hr BTU, 0.13 hp, Steel

  • Manufacturer: Aireforce
  • Brand Name: AireForce®
  • Part#: AFWSH2BE4M1SP30K
  • MPN: WSH2BE4M1SP30K
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at All Branches

The WSH2BE Series heat pump, when combined with our engineered coils or air handlers, offers a full line of quality, split system heating and cooling equipment. Units are ideally sized for slab or rooftop mounting in light commercial applications.

AireForce® High Efficiency Heat Pump, WSH2BE Series, 208/230 V, 13.7 A, 0.13 hp, 60 Hz, 1 ph Phase, 30000 Btu/hr, 980 cfm, 12.2 EER Rating, 14 SEER, 8.2 HSPF, Brazed Connection, Scroll Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 3/4 in Suction Line, 25 A Fuse Rating, Tonnage: 2.5 ton, 75 dB Sound Level, 1 Stages, Steel, Finish: Galvanized/Polyester Urethane-Coated, 39-1/2 in H x 30-3/4 in W x 30-3/4 in D, Additional Information: PSC Motor

Additional Information      :      PSC Motor
Amperage Rating      :      13.7 A
BTU Rating      :      30000 Btu/hr
CFM Rating      :      980 cfm
Compressor Type      :      Scroll
Connection Type      :      Brazed
Dimensions      :      39-1/2 in H x 30-3/4 in W x 30-3/4 in D
EER Rating      :      12.2
Finish      :      Galvanized/Polyester Urethane-Coated
Frequency Rating      :      60 Hz
Fuse Rating      :      25 A
HP Rating      :      0.13 hp
HSPF Rating      :      8.2
Liquid Line Size      :      3/8 in
Material      :      Steel
Number of Stages      :      1
Phase      :      1 ph
Refrigerant Type      :      R-410A
SEER Rating      :      14
Series      :      WSH2BE Series
Sound Level      :      75 dB
Suction Line Size      :      3/4 in
Tonnage      :      2.5 ton
Voltage Rating      :      208/230 V
  • Quality compressor state of the art copeland scroll compressor is standard equipment
  • Patented hot gas bypass defrost ensures that outdoor coil defrosts every time and only when necessary
  • Brass valves that are easily accessible and simplify servicing of the refrigeration system
  • Galvanized steel design polyester urethane coat finish passes 950 hr of salt spray per ASTM 8117
  • Composite base pan absorbs sound and is corrosion-resistant
  • Composite is also stronger and lighter than steel
  • Permanently lubricated motor a heavy-duty PSC motor for long lasting reliability and quiet operation
  • Requires no maintenance and is completely protected from rain and snow
  • Removable top grille assembly allows ease-of service from the top without disconnecting fan motor leads
  • Suction accumulator and crankcase heater protection from liquid flood back and future compressor failures
  • Hot gas muffler reduces compressor noise and vibration
  • Low pressure switch loss of charge protection ensures long compressor life
  • Auto-reset feature prevents nuisance service visits
  • High pressure switch protects against abnormally high system pressures
  • One-piece top/orifice designed for maximum airflow and quiet operation
  • Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit
  • Aluminum coils in all models which provides high corrosion resistance
  • Powder-coated wire guard and mesh hail guard will never rust and protects the coil from being damaged
  • Common suction service port this port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability