Contact 800-252-8714

AireForce® Q7RE030K AFQ7RE030K
  1. pin-int

AireForce® Q7RE030K Single-Packaged Heat Pump, 2.5 ton Nominal, 27400 Btu/hr Heating BTU, 208/230 V, 17.3 A, 14 SEER

  • Manufacturer: Aireforce
  • Brand Name: AireForce®
  • Part#: AFQ7RE030K
  • MPN: Q7RE030K
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at All Branches

The Q7 Series single packaged heat pumps are high efficiency self-contained cooling and heating units that can be installed on a slab or on a roof. Units are ETL and ETLc listed.

AireForce® Single-Packaged Heat Pump, Series: Q7RE Series, 2.5 ton Nominal Capacity, Cooling BTU Rating: 28200 Btu/hr, Heating BTU Rating: 27400 Btu/hr, 208/230 V, 17.3 A, 1/8 hp HP Rating, 60 Hz, 1 ph, 1100 rpm Rotational Speed, 14 SEER, HSPF: 8, 11 EER, R-410A, 25 A Fuse, 74 dB, Steel, Galvanized/Polyester Urethane-Coated, 49 in L x 35 in W x 30.2 in H, Additional Information: PSC Motor

Additional Information      :      PSC Motor
Amperage Rating      :      17.3 A
Cooling BTU Rating      :      28200 Btu/hr
Dimensions      :      49 in L x 35 in W x 30.2 in H
EER Rating      :      11
Finish      :      Galvanized/Polyester Urethane-Coated
Frequency Rating      :      60 Hz
Fuse Rating      :      25 A
HP Rating      :      1/8 hp
HSPF Rating      :      8
Heating BTU Rating      :      27400 Btu/hr
Material      :      Steel
Nominal Capacity      :      2.5 ton
Phase      :      1 ph
Refrigerant Type      :      R-410A
Rotational Speed      :      1100 rpm
SEER Rating      :      14
Series      :      Q7RE Series
Sound Level      :      74 dB
Voltage Rating      :      208/230 V
  • First in industry patented hot gas defrost ensures complete, worry-free defrost
  • Quality compressor state of the art compressor is standard equipment
  • High/low pressure switches ensure long compressor life
  • All aluminum coils provides high corrosion resistance, lower refrigerant volume
  • Designed using galvanized steel with a polyester urethane coat finish
  • The finish passes 950 hr of salt spray per ASTM B117
  • Compact footprint and profile - make the Q7 Series easy to transport and install
  • 0 in clearance - to combustibles on duct side of the unit allows for installations in tight areas
  • Wire guard-coated with earth friendly epoxy and plastic mesh hail guard a guard that will never rust and protects the units coil from being damaged
  • Raised base pan allows water to drain away from away from the unit
  • Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit
  • Easy access to the evaporator coil and blower assembly for cleaning and general maintenance
  • Removable top grille assembly allows ease-of service to the fan motor
  • Five-minute restart time delay when the unit shuts down, a five-minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure
  • Liquid line filter drier factory installed at a convenient location for service
  • Accessible service valves simplify servicing of the refrigeration system
  • Suction accumulator provides protection from liquid flood back and future compressor failures
  • Permanently lubricated condenser motor a heavy-duty PSC motor for long lasting reliability and quiet operation
  • Low voltage transformer includes 3 A fuse to protect low voltage circuit
  • Drain trap included design optimizes drainage capabilities