AireForce® KG7SD120DT45D1 Gas Furnace, 115 V, 1 hp, 95 % AFUE, Upflow, Gas
- Manufacturer: Aireforce
- Brand Name: AireForce®
- Part#: AFKG7SD120DT45D1
- MPN: KG7SD120DT45D1
- Min. Order Qty: 1
- Qty. Interval: 1
-
Available at All Branches
-
Price:
The high efficiency upflow gas furnace may be installed free-standing in a utility room, basement or enclosed in an alcove or closet. The extended flush jacket provides a pleasing "appliance appearance".
AireForce® Gas Furnace, Series: KG7SD, 120000 Btu/hr Input, 109000 Btu/hr Output, 115 V, 11.5 A, 1 hp Rating, 95 % AFUE, 60 Hz, 1 Stage, Upflow Configuration, NPT Connection Type, 1/2 in Connection, Gas, 5 Speed, 11 in Dia x 10 in W Blower, 34-1/2 in H x 24-1/2 in W x 28 in D Cabinet, 5-Tap Fixed Speed ECM Motor, 4.5 ton Tonnage, Hot Surface Ignition, Silicon Nitride Ignition, 0.5 in-WC, 40 to 70 deg F Rise
| AFUE Rating | : | 95 % |
| Amperage Rating | : | 11.5 A |
| Blower Size | : | 11 in Dia x 10 in W |
| Cabinet Dimensions | : | 34-1/2 in H x 24-1/2 in W x 28 in D |
| Configuration | : | Upflow |
| Connection Size | : | 1/2 in |
| Connection Type | : | NPT |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Gas |
| HP Rating | : | 1 hp |
| Ignition System | : | Hot Surface |
| Ignition Type | : | Silicon Nitride |
| Input BTU Rating | : | 120000 Btu/hr |
| Motor Type | : | 5-Tap Fixed Speed ECM |
| Number of Speeds | : | 5 |
| Number of Stages | : | 1 |
| Output BTU Rating | : | 109000 Btu/hr |
| Pressure Rating | : | 0.5 in-WC |
| Series | : | KG7SD Series |
| Temperature Rise | : | 40 to 70 deg F |
| Tonnage | : | 4.5 ton |
| Voltage Rating | : | 115 V |
- 100% fired and tested all units and each component are tested on the manufacturing line
- Best packaging in the industry unique corner post design assures product will arrive to the homeowner dent-free
- 30 sec blower delay at start-up assures a warm duct temperature at furnace start-up
- Adjustable blower off settings (60 sec, 90 sec, 120 sec and 180 sec)
- 30 sec post purge increases life of heat exchanger
- Hot surface igniter innovative application of a silicon nitride-type igniter, utilizes proven SmartLite® technology
- Color-coded wire harness designed to fit the components, all with quick-connect fittings for ease of service and replacement
- Flexible category IV venting system may be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation
- High static blowers all models equipped with high static blowers
- Low boy height - easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install
- Tubular primary heat exchanger heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life
- 60 sec fixed cooling cycle blower off delay (TDR) increases cooling performance when matched with a Nortek Global HVAC coil
- Multi-speed direct drive blower - designed to give a wide range of cooling capacities, dip switches on PCB provide easy motor speed selection
- LP convertible simple burner orifice and regulator spring change for ease of convertibility
- Incorporates integrated control board with connections for electronic air cleaner and humidifier
- Two-piece door design enhances furnace appearance and uses captured screws to prevent losing door screws
- Blower compartment sealed door to reduce air leakage and insulated for ultra-quiet operation
- Sealed vestibule reduces burner and inducer sound levels
- Furnace air leakage - these furnaces comply with ENERGY STAR cabinet air leakage requirement of less than or equal to 2%, keep the conditioned air flowing to where it's needed
- PolyPro by DuraVent - these furnaces have been tested with and are approved to be installed with DuraVent's PolyPro venting system
Catalog