FT3BD Series 30,000 BTU Heat Pump

Sold As Is - No Obvious Damage - R-22 System

The FT3BD Series of heat pumps offers exceptional performance from a small, compact package. The heat pump, when combined with our engineered coils or air handlers, offers a line of quality, split system heating and cooling equipment. The FT3BD is rated at 13 SEER and 8.0 HSPF when matched with our air handlers. When matched with our variable speed air handler, or our variable speed blower kits, the FT3BD is rated up to 14 SEER and 8.5 HSPF. Units are ideally sized for slab or rooftop mounting in single,
multifamily, and light commercial applications.

Sold As Is - No Obvious Damage - R-22 System

• Quality Compressor - State of the art Copeland scroll compressor is standard equipment.
• Durable, Attractive Cabinet – Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units.
• Copper Tube / Aluminum Fin Coils – Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability.
• Permanently Lubricated Motor – A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow.
• Full Service Valves – These brass valves are easily accessible and simplify servicing of the refrigeration system.
• Louvered Condenser Guard – Durable metal guard protects the coil from yard hazards and extreme weather.
• Time / Temperature Defrost – A reliable, industry standard control offers various time settings to meet any type climate.
• Removable Top Grille Assembly – Allows ease of service from the top without disconnecting fan motor leads.
• Hail Guard – Provided for coil protection.
• One Piece Top/Orifice – Designed for maximum airflow and quiet operation.
• Common Suction Service Port – This port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability.
• 2-1/2" Pedestal Base – The sturdy base keeps the bottom of the coil out of harms way. Secondly, the base has weep holes along the edge to allow the water from the defrosting coil and rain to flow away from the unit.
• Five Minute Restart Time Delay – When the unit shuts down, a five minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure.
• Suction Accumulator – Protection from liquid flood back and future compressor failures.
• Hot Gas Muffler – Reduces compressor noise and vibration.
• Easy Compressor and Control Access – Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit.

• FT3BD Series Ultra High Efficiency Heat Pumps https://enora.nortekhvac.com/literature/a939a.pdf