AireForce® FSH1BG Series FSH1BG4CVRX36K Ultra High Efficiency Heat Pump, 208/230 V, 17.50 A, 36000 Btu/hr BTU, 1/3 hp
- Manufacturer: Aireforce
- Brand Name: AireForce®
- Part#: AFFSH1BG4CVRX36K
- MPN: FSH1BG4CVRX36K
- Min. Order Qty: 1
- Qty. Interval: 1
-
Available at All Branches
-
Price:
The iQ Drive® heat pump system features modulating compressor technology and variable speed indoor and outdoor fan motors. This system is controlled from a two-stage cooling and heating heat pump thermostat. The system has the capability of adding up to 18% of additional cooling/heating above the rated capacity. The B6VMAX air handler has de-humidification capabilities from the thermostat or duct mounted humidistat.
AireForce® Ultra High Efficiency Heat Pump, FSH1BG Series, 208/230 V, 17.50 A, 1/3 hp, 60 Hz, 1 ph Phase, 36000 Btu/hr, 805 to 1200 cfm, 12.6 EER Rating, 19 SEER, 10 HSPF, Brazed Connection, Scroll Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 1-1/8 in Suction Line, 35 A Fuse Rating, Inverter Drive, 71 dB Sound Level, Steel, Finish: Galvanized/Polyester Urethane-Coated, 41-1/4 in H x 31-3/4 in W x 31-3/4 in D, Additional Information: BLDC Motor
| Additional Information | : | BLDC Motor |
| Amperage Rating | : | 17.50 A |
| BTU Rating | : | 36000 Btu/hr |
| CFM Rating | : | 805 to 1200 cfm |
| Compressor Type | : | Scroll |
| Connection Type | : | Brazed |
| Dimensions | : | 41-1/4 in H x 31-3/4 in W x 31-3/4 in D |
| Drive Type | : | Inverter |
| EER Rating | : | 12.6 |
| Finish | : | Galvanized/Polyester Urethane-Coated |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 35 A |
| HP Rating | : | 1/3 hp |
| HSPF Rating | : | 10 |
| Liquid Line Size | : | 3/8 in |
| Material | : | Steel |
| Phase | : | 1 ph |
| Refrigerant Type | : | R-410A |
| SEER Rating | : | 19 |
| Series | : | FSH1BG Series |
| Sound Level | : | 71 dB |
| Suction Line Size | : | 1-1/8 in |
| Voltage Rating | : | 208/230 V |
- IQ Drive® inverter driven Samsung rotary compressor provides five capacities in modulating operation from a two-stage thermostat
- Interface control board two-digit LED provides system operation, status and diagnostic troubleshooting information
- Suction accumulator protection from liquid flood back and future compressor failures
- Compressor and component access designed to make servicing easier for the contractor, hinge access panels are provided to all controls and the compressor
- High efficiency with the low sound levels up to 19 SEER with sound ratings of 58 to 73 depending upon operating conditions
- Compressor sound blanket engineered to significantly reduce unwanted compressor noise
- Variable speed condenser motor and swept-wing fan blade a heavy-duty brushless DC motor for long lasting reliability and engineered to provide quiet operation
- Requires no maintenance and is completely protected from rain and snow
- Common suction service port this port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability
- Discharge muffler reduces compressor noise and vibration
- High pressure switch protects against abnormally high system pressures
- Auto-reset feature prevents nuisance service visits
- Low pressure switch protects against loss of system refrigerant charge
- Liquid line filter drier included with unit, field installed
- Copper tube/aluminum fin coils outdoor coils are designed to optimize heat transfer and increase durability and reliability
- Composite base pan absorbs sound and is corrosion-resistant
- Composite pan is also stronger and lighter than steel
- Designed using galvanized steel with a polyester urethane coat finish, it passes 950 hr of salt spray per ASTM B117
- One-piece top/orifice designed for maximum airflow and quiet operation
- Removable top grille assembly allows ease-of service from the top without disconnecting fan motor leads
Specification Sheet