Contact 800-252-8714

AireForce® FSH1BF4M2SX60K AFFSH1BF4M2SX60K
  1. pin-int

AireForce® FSH1BF Series FSH1BF4M2SX60K Extra High Efficiency Heat Pump, 208/230 V, 31.4 A, 60000 Btu/hr BTU, 0.33 hp

  • Manufacturer: Aireforce
  • Brand Name: AireForce®
  • Part#: AFFSH1BF4M2SX60K
  • MPN: FSH1BF4M2SX60K
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at All Branches

The FSH1BF Series of heat pumps offers exceptional performance as well as environmental protection. These models, when matched with our variable speed air handlers or variable speed equipped gas furnaces, offer a line of high quality heat pump systems rated up to 16 SEER and 9 HSPF.

AireForce® Extra High Efficiency Heat Pump, FSH1BF Series, 208/230 V, 31.4 A, 0.33 hp, 60 Hz, 1 ph Phase, 60000 Btu/hr, 1280 to 1835 cfm, 11.5 EER Rating, 16 SEER, 8.5 HSPF, Brazed Connection, Scroll Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 1-1/8 in Suction Line, 60 A Fuse Rating, 78 dB Sound Level, 1 Stages, Steel, Finish: Galvanized/Polyester Urethane-Coated, 45-1/4 in H x 31-3/4 in W x 31-3/4 in D, Additional Information: BLDC Motor

Additional Information      :      BLDC Motor
Amperage Rating      :      31.4 A
BTU Rating      :      60000 Btu/hr
CFM Rating      :      1280 to 1835 cfm
Compressor Type      :      Scroll
Connection Type      :      Brazed
Dimensions      :      45-1/4 in H x 31-3/4 in W x 31-3/4 in D
EER Rating      :      11.5
Finish      :      Galvanized/Polyester Urethane-Coated
Frequency Rating      :      60 Hz
Fuse Rating      :      60 A
HP Rating      :      0.33 hp
HSPF Rating      :      8.5
Liquid Line Size      :      3/8 in
Material      :      Steel
Number of Stages      :      1
Phase      :      1 ph
Refrigerant Type      :      R-410A
SEER Rating      :      16
Series      :      FSH1BF Series
Sound Level      :      78 dB
Suction Line Size      :      1-1/8 in
Voltage Rating      :      208/230 V
  • CoreSense™ compressor protection: control module actively monitors compressor conditions and will shut the unit down to prevent damage
  • Copeland scroll UltraTech™ compressor the UltraTech™ compressor operates with two-stage of heating and cooling capacities to provide superior comfort and efficiency
  • Copeland proven and simple design equates to years of comfort and reliability for the homeowner with virtually silent operation
  • Designed using galvanized steel with a polyester urethane coat finish, it passes 950 hr of salt spray per ASTM B117
  • Composite base pan absorbs sound and is corrosion-resistant
  • Composite is also stronger and lighter than steel
  • Micro-channel coils all aluminum coils in all models which provides high corrosion resistance
  • Demand defrost provides additional energy savings in heating by defrosting only when necessary
  • Removable top grille assembly allows ease-of service from the top without disconnecting fan motor leads
  • Compressor sound blanket engineered to significantly reduce unwanted compressor noise
  • Swept wing fan blade designed to significantly reduce unwanted noise
  • Low pressure switch loss of charge protection ensures long compressor life
  • Auto-reset feature prevents nuisance service visits
  • High pressure switch protects against abnormally high system pressures
  • Liquid line filter drier included with unit, field installed
  • One-piece top/orifice designed for maximum airflow and quiet operation
  • Common suction service port this port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability
  • Five-minute restart time delay when the unit shuts down, a five-minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure
  • Suction accumulator protection from liquid flood back and future compressor failures