AireForce® FG7TE060DV24B1 Gas Furnace, 115 V, 1/2 hp, 96 % AFUE, Upflow, Gas
- Manufacturer: Aireforce
- Brand Name: AireForce®
- Part#: AFFG7TE060DVB1
- MPN: FG7TE060DV24B1
- Min. Order Qty: 1
- Qty. Interval: 1
-
Available at All Branches
-
Price:
The high efficiency upflow gas furnace may be installed free-standing in a utility room, basement or enclosed in an alcove or closet. The extended flush jacket provides a pleasing "appliance appearance".
AireForce® Gas Furnace, Series: FG7TE, 60000 Btu/hr Input, 58000 Btu/hr Output, 115 V, 6.9 A, 1/2 hp Rating, 96 % AFUE, 60 Hz, 2 Stage, Upflow Configuration, NPT Connection Type, 1/2 in Connection, Gas, 34-1/2 in H x 14-1/4 in W x 28 in D Cabinet, Variable Speed ECM Motor, 2.4 ton Tonnage, Hot Surface Ignition, Silicon Nitride Ignition, 0.5 in-WC, 30 to 60 deg F Rise
| AFUE Rating | : | 96 % |
| Amperage Rating | : | 6.9 A |
| Cabinet Dimensions | : | 34-1/2 in H x 14-1/4 in W x 28 in D |
| Configuration | : | Upflow |
| Connection Size | : | 1/2 in |
| Connection Type | : | NPT |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Gas |
| HP Rating | : | 1/2 hp |
| Ignition System | : | Hot Surface |
| Ignition Type | : | Silicon Nitride |
| Input BTU Rating | : | 60000 Btu/hr |
| Motor Type | : | Variable Speed ECM |
| Number of Stages | : | 2 |
| Output BTU Rating | : | 58000 Btu/hr |
| Pressure Rating | : | 0.5 in-WC |
| Series | : | FG7TE Series |
| Temperature Rise | : | 30 to 60 deg F |
| Tonnage | : | 2.4 ton |
| Voltage Rating | : | 115 V |
- Variable speed direct drive blower energy efficient brushless DC (ECM) motor controls airflow to provide better temperature control, humidity control and air distribution
- SmartLite® technology auto-adjusts igniter on time to extend igniter life
- Hot surface igniter innovative application of a silicon nitride-type igniter
- 30 sec blower delay at start-up assures a warm duct temperature at furnace start-up
- Adjustable blower off settings (60 sec, 90 sec, 120 sec and 180 sec)
- 30 sec post purge increases life of heat exchanger
- 60 sec fixed cooling cycle blower off delay (TDR) increases cooling performance when matched with a Nortek Global HVAC coil
- Color-coded wire harness designed to fit the components, all with quick-connect fittings for ease of service and replacement
- Diagnostic lights dedicated light for flame signal strength and two lights in combination to indicate all other fault codes with easy to recognize states without counting flashes
- Integrated control boards with connections for electronic air cleaner, humidifier and dehumidification
- Ergonomically located for ease of service
- Two-stage inducer optimizes efficiency on first stage heat and reduces sound levels
- Heat exchanger heavy gauge aluminized steel primary heat exchanger and stainless steel secondary heat exchanger assures a long life
- 100% fired and tested all units and each component are tested on the manufacturing line
- Best packaging in the industry unique corner post design assures product will arrive to the homeowner dent-free
- Flexible category IV venting system may be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation
- Low boy height - easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install
- LP convertible simple burner orifice and regulator spring change for ease of convertibility (as an accessory)
- Two-piece door design enhances furnace appearance and uses captured screws to prevent losing door screws
- Blower compartment sealed door to reduce air leakage and insulated for ultra-quiet operation
Catalog